Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Introduction and Features of rotor FLOW METER
The rotor flow meter is to measure the fluid flow rate according to the principle of throttling flow, but it changes the flow area of the fluid to keep the differential pressure up and down the rotor constant, so it is also called the variable flow area constant differential pressure flow
Principle and Characteristics of Electric Control Valve
Electric Control Valve is a hydraulic operated valve with solenoid valve as the guide valve. Often used in the automatic control of water supply and drainage and industrial system, the control response is accurate and fast, according to the electrical signal remote control to open and close the pipe road system, to achieve remote operation. Replacing gate valve and butterfly valve for large electric operating system. The valve closing speed is adjustable, and it is closed smoothly without causing pressure fl
Brief Introduction of Pneumatic Valve
Pneumatic valves are valves driven by means of compressed air. Use: Pneumatic valve is a right Angle rotary structure, composed of V-type valve body, pneumatic actuator, locator and other accessories, it is used with the valve positioning device, proportional adjustment, an approximate equivalent inherent flow characteristics; using double be
Attention Matters of Using PFA PTFE Lined Valve
The PFA PTFE Lined Valve price is high, the working environment is bad, is not toxic and harmful chemicals, is highly corrosive all kinds of acid and alkali or organic solvents, improper use will produce significant economic losses and serious consequences. Correct use and maintenance of the valve can extend the service life of the PFA PTFE Lined Valve, prevent all kinds of accidents, and ensure the normal operation of the pipeline. Therefore, the following points must be noted in use:
Introduction of PTFE and Installation of PFA PTFE Lined Valve
Introduction of PTFE: in corrosion resistance materials, PTFE has incomparable excellent properties, in addition to molten alkali metals, element fluorine and aromatic hydrocarbons, in various concentrations of hydrochloric acid, sulfuric acid, nitric acid, royal water, organic acid, strong oxide, thick, dilute acid, alkali alternating and a variety of organic solvents, PTFE lining in the valve wall, to overcome the low PTFE material strength, and solve the valve main material corrosion resistance and high cost. In addit
Introduction, Classification and Application of PFA PTFE Lined Valve
Lining fluorine valve, also known as fluorine plastic lining corrosion valve, is the PTFE resin (or profile processing) using molding (or inlay) method in the steel or iron valve pressure wall (the same method is suitable for the kinds of various pressure vessels and pipeline accessories lining) or the outer surface of the valve inside, using its unique performance in strong corrosion resistance media to be made of all kinds of valves and pressure vessels.
Characteristics of PVC Foot Valve
The essence of PVC Foot Valve is a kind of vacuum suction film, which can be generally divided into soft and hard, used for the surface packaging of all kinds of panels, so it is also known as decorative film, adhesive film, used in building materials, packaging, medicine and many other industries, among which the building materials industry accounts for a significant proportion, followed by the packaging industry. The water supply pipe system is
Introduction of One Way Plastic Check Valve
One way valve is fluid can only flow along the inlet, the inlet medium can not return, commonly known as check valve. Used to prevent reverse oil flow in hydraulic system or reverse flow of compressed air in pneumatic system. Check valve comes in straight through type and right Angle type two kinds. T
Brief Introduction of Three-way Plastic Ball Valve
Three-way ball valves are of T type and L type. T can make three orthogonal pipelines connect and cut off the third channel, play the role of diversion and confluence. The L three-way ball valve type can only connect two pipes orthogonal to each other, and cannot maintain the connection of the third pipe interconnected at the same time, and only plays a d
Comparison of Pneumatic Control Valves and Hydraulic Valves
Pneumatic control valve refers to all kinds of pneumatic elements that control the pressure, flow and flow direction in the pneumatic system and ensure the normal operation of the pneumatic actuator or mechanism. The elements that control and regulate the compressed air pressure are known as pressure control valves. The element that changes and controls the direction of the air flow is called a directional control valve.
Working Principle and Advantages of Plastic Gate Valve
Working principle of the Plastic Gate Valve: the opening and closing part of the gate valve is the gate plate, the direction of motion of the gate plate is perpendicular to the fluid direction, the PVC Gate Valve can only be fully opened and closed, not adjusted and throttling. The gate has two sealing faces, the most commonly used two sealing faces of the mode gate valve form a wedge, wedge angles vary with the valve parameters, usually 5,2 52'when the medium temperature is not high. The gate plate of the wedge gate val
Characteristics of PE Pipe Fitting Electrofusion
PE Pipe Fitting Electrofusion: The development of PE pipeline system: PE is a variety of process methods of resin production, with a variety of structures and characteristics and a variety of uses, has accounted for one third of the world's synthetic resin production, in the first place. The application of PE Pipe began in the 1940s, and were originally used as telephone line pipes and mine non-pressure dr
Brief Introduction of Plastic Gate Valve
Gate valve is a piece of opening and closing gate, the movement direction of the gate is perpendicular to the fluid direction, the gate valve can only be fully open and fully closed, uncomfortable door parameters vary, usually 5, the medium temperature is not high for 2 52 '. Improve its process to make up for the deviation in the Angle of the sealing surface process, this brake is called elastic brake. Principle: close parts (gate) a
Characteristics of PE Pipe Fitting
Product introduction: PE materials are widely used in the field of water supply and drainage manufacturing due to their high strength, high temperature resistance, corrosion resistance, non-toxic, wear resistance and other characteristics. Because it does not rust, it is an ideal substitute for ordinary iron water supply pipe. The PE Pipe has medium density polyethylene tubes and high density polyethylene tu
Characteristics and Advantages of PVDF Plate and PVDF Rod
PVDF rod is made of PVDF resin through high temperature extrusion into the rod, is a quite pure polymer, it does not contain ultraviolet stabilizers, thermal stabilizers, softeners, lubricants or flame retardant and other additives. Oxygen content index is 46%, flame retardant, crystallinity of 65% -78%, density of 1.79~1.83g/cm3, melting point of 188℃, thermal deformation temperature of 120-151℃, long-term use temperature of-140-160℃. Du
Introduction of Tee, End Cap and Reducer in HDPE Pipe Fittings
HDPE Pipe Fittings are utility model patent products, high quality and low price, with the following advantages: 1. There are locking hoop, ladder ring sealing ring and other parts inside. 2. Convenient connection, easy to dismantle, strong flexibility, easy to recycle, beautiful and practical.
Brief Introduction of PVC Sheet and PVC Rod
The PVC Plate is a plate made of PVC as a raw material as a honeycomb mesh structure, which is a kind of vacuum suction plastic film. Used in all kinds of panel surface packaging, so it is also known as decorative film, adhesive film, used in building materials, packaging, medicine and many other industries. Among them, the building materials industry accounted for the largest proportion of 60%, followed by the packaging industry, and several other small range of application industries. According to the degree of soft and hard
Connection Matters of PE Pipe Fitting
PE is polyethylene plastic, the most basic kind of plastic, plastic bags, plastic wrap and so on are PE, HDPE is a high crystallinity, nonpolar thermoplastic resin. General provisions: 1. Before pipe connection, the pipe materials, PE Pipe
Brief Introduction of PE Fitting Gas Electric Melt Tapping Saddle
PE Electro Fusion Tapping Saddle type: PE Fitting Gas electric melt tapping melt pipe is made of high quality raw materials. The embedded hidden electric heating wire is firmly held, which can greatly improve the external force impact resistance of the pipe fittings, and can avoid the electric heating wire short circuit caused by the heat flow and extrusion of PE raw material. The observation hole can intu
Different Connections Of PE Pipe For Water Supply
PE water supply pipe connection method: polyethylene pipe and pipe, pipe and PE pipe, pipe and accessories, and polyethylene pipe and metal pipe connection between many, different connection methods have their own advantages and limitations, users can according to the pipe diameter, working pressure, use place and other environment, choose the appropriate connection way. The most commonly used connection methods of urban water supply polyethylene pipeline are: PE Pipe Fitting Socket
Main Features of PE Pipe Fitting
PE Pipe: PE resin, is made of monomer ethylene polymerization, because in the polymerization due to pressure, temperature and other polymerization reaction conditions, can get different resin density, so there are high density polyethylene, medium density polyethylene and low density polyethylene. When processing different types of PE pipes, according to their different application conditions, choose different resin labels, and the requirements for extruder and mold are also different. The pe pipes produced are divided i
Performance Advantage of HDPE Pipe Fitting
A good pipeline should not only have good economy, but also have a series of advantages, material impact resistance, cracking resistance, aging resistance and corrosion resistance. Compared with traditional pipelines, HDPE pipeline system has the following series of advantages: ⑴Reliable connection: the PE Pipe Fitting Socket Fusion system is connected by ele
Connection Type of HDPE Pipe Fittings
PE Pipe connection: PE pipe welding, PE pipe butt welds, this method provides the highest reliability and diameter of the range and pressure process: the end of the heated pipe, using a tool called contact pressure and temperature definition. The ends were rapidly contacted and kept under pressure during cooling. Connection form: pe tube and pp tube can be divided according to interface form and heating mode:
Advantages of the HDPE Pipe Fitting System
The PE Pipe: PE is polyethylene plastic, the most basic plastic, plastic bags, plastic wrap are PE, HDPE is a high crystallinity, nonpolar thermoplastic resin. The appearance of primary HDPE is milky white, with a degree of translucent in the thin cross section. PE has excellent resistance to most living and industrial chemicals. Advantages of the HDPE pipeline system:
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.