Communicate with Supplier? Supplier
Zheng Mr. Zheng
What can I do for you?
Contact Supplier

Ningbo RMI Plastic Co., Ltd.

Upvc Valve Din - manufacturer, factory, supplier from China

(Total 24 Products for Upvc Valve Din)

  • PVC Butterfly Valve Lever Type DIN PN10

    PVC Butterfly Valve Lever Type DIN PN10

    • Brand: RMI PLAST

    • Packaging: Carton or Plywood case

    • Supply Ability: 2500 sets per month

    • Min. Order: 20 Set/Sets

    PVC butterfly valve lever type DIN PN10 is PVC body and disc with EPDM seat and seal hand lever operation wafer connection as per DIN PN10 flange standard PVC butterfly valve model RPV121B is suitable for water supply water treatment irrigation finishing farm swimming pool etc RMI PLAST brand PVC butterfly valve model...

    Contact Now

  • PTFE lined diaphragm valve

    PTFE lined diaphragm valve

    • Brand: RMIPLAST

    • Packaging: Wooden case

    • Supply Ability: 1000 sets per month

    • Min. Order: 1 Piece/Pieces

    RFV211 diaphragm valve is a weir type diaphragm valve with fluorine plastic lined the body is made by WCB cast iron and liner made by PTFE and FEP this valve is suitable for corrossive medium with temperarure below 150 degree and pressure rate below PN1 6 Mpa Basic specification Size range DN15 DN300 1 2 inch 12 inch...

    Contact Now

  • UPVC Pulsation Damper 0.35L 0.6L 1.0L

    UPVC Pulsation Damper 0.35L 0.6L 1.0L

    • Brand: RMIPLAST

    • Packaging: carton

    • Supply Ability: 1000/MOUNTH

    • Min. Order: 10 Piece/Pieces

    Pulsation Damper is a device for eliminating pipeline pulsation and an accessory for metering pump It can smooth the pipeline pulsation and water hammer caused by metering pump diaphragm pump etc The medium is isolated by a corrosion resistant diaphragm the pipeline pulsation is smoothed by changing of the volume of...

    Contact Now

  • Pneumatic Ball Valve For End Control Pipe Systems

    Pneumatic Ball Valve For End Control Pipe Systems

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Small Size Pneumatic Ball Valve used for End Control Pipe Systems different valve material plastic steel stainless steel PTFE lined for optional pneumatic actuator double acting and single acting solenoid valve and limit switch box with signal feedback 4 20mA to control by system easily small size pneumatic ball is...

    Contact Now

  • Pneumatic Ball Valve SS316 Single Acting

    Pneumatic Ball Valve SS316 Single Acting

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Pneumatic Ball Valve SS316 size range 1 4 inch 3 8 inch 1 2 inch 3 4 inch 1 inch 1 1 4 inch 1 1 2 inch 2 inch 2 1 2 inch 3 inch 4 inch pneumatic actuator single acting with solenoid valve 220V 24V IP65 limit switch box with indicator Pneumatic Ball Valve SS316 is used for water treatment equipment chemical industry...

    Contact Now

  • Double Acting Pneumatic Ball Valve 2" 2-1/2" 3"

    Double Acting Pneumatic Ball Valve 2" 2-1/2" 3"

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Pneumatic Ball Valve Double Acting Size 2 2 1 2 3 4 valve material 304 standard DIN ANSI ISO BS thread connection and welding for optional Pneumatic actuator with Aluminium alloy shell and high quality inner parts air supply 0 5 0 8Mpa to control valve open and close 304 pneumatic Ball Valve is used for water pipeline...

    Contact Now

  • Double Acting Pneumatic Ball Valve 1/2" 3/4" 1"

    Double Acting Pneumatic Ball Valve 1/2" 3/4" 1"

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Double Acting Pneumatic Ball Valve Stainless Steel 304 offering size 1 4 3 8 1 2 3 4 1 1 1 4 1 1 2 2 2 1 2 3 4 it is suitable for water treatment weak acid pipe system hot water pipeline steam pipe system chemical project etc Pneumatic Ball Valve double acting use air supply 0 5 0 8Mpa to control valve open and close...

    Contact Now

  • Pneumatic 304 Ball Valve Double Acting Spring Return

    Pneumatic 304 Ball Valve Double Acting Spring Return

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Pneumatic Stainless Steel Ball Valve 3pcs type thread end welding end size range 1 4 to 4 body material have 201 304 316 316L actuator by pneumatic double acting and single acting solenoid valve limit switch box positioner and other accessories for optional this model pneumatic ball valve is suitable for water steam...

    Contact Now

  • Steel Pneumatic Ball Valve Double Acting Spring Return

    Steel Pneumatic Ball Valve Double Acting Spring Return

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    High quality Stainless Steel Pneumatic Ball Valve 2pcs SS304 316 body investment casing pressure rating 1 6 Mpa working temperature 20 to 180 size range DN6 to DN100 connection NPT BSPT actuator double acting and single acting available high quality treatment and inner parts Pneumatic Stainless Steel Ball Valve 2 pcs...

    Contact Now

  • Electric Actuated Ball Valve Three Way

    Electric Actuated Ball Valve Three Way

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Electric Actuated Ball Valve Three Way L Port T Port size 1 4 3 8 1 2 3 4 1 1 1 4 1 1 2 2 2 1 2 3 material stainless Steel 304 304L 316 316L NPT BSPT thread end socket and butt welding end for optional working pressure 1000WOG working temperature 20 to 180 electric three way ball valve have following features and...

    Contact Now

  • Three Way Motorized Ball Valve L port

    Three Way Motorized Ball Valve L port

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Three Way Ball Valve with motorized actuator size rang 1 4 to 3 L port and T port for optional 220V and 24V 50 60Hz open close type and regulating type electric three way ball valve with stainless steel body suitable for medium of water gas steam and chemical easy install and maintenance electric three way ball valve...

    Contact Now

  • Electric Ball Valve Stainless Steel 1-1/4" 1-1/2" 2"

    Electric Ball Valve Stainless Steel 1-1/4" 1-1/2" 2"

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    1 1 4 1 1 2 2 Electric Ball Valve produced by high quality Stainless Steel Ball Valve 304 304L 316 316L with excellent electric actuator EA23 used for water treatment systems chemical equipments small size body require small install room simple structure is easy to maintence and operate electric actuator use plastic...

    Contact Now

  • PPH Ball Valve Three Way Socket Fusion

    PPH Ball Valve Three Way Socket Fusion

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 900 sets per month

    • Min. Order: 5 Set/Sets

    PPH Ball Valve Three Way T Port Socket Fusion is a ball valve with three port which make the medium get through the main function of PPH three way ball valve is to switch the direction of the medium and control the system plastic three way ball valve is mainly used for corrosive resist purpose due to the PPH material...

    Contact Now

  • PPH Ball Valve Lever Handle Flange End JIS

    PPH Ball Valve Lever Handle Flange End JIS

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 5200 sets per month

    • Min. Order: 40 Set/Sets

    PPH Ball Valve Lever Handle Flange End JIS 10K size range from 15A to 150A it is a flange type ball valve as per JIS10K connection body material made by PPH which is a special material of PP with better corrosive resistance property PPH Ball Valve is used for chemical industrial such as acid pickling mining plant it...

    Contact Now

  • Electric Ball Valve For Water and Gas System

    Electric Ball Valve For Water and Gas System

    • Packaging: Carton

    • Min. Order: 10 Set/Sets

    • Model No.: REV-426A

    • Transportation: Ocean,Air

    Electric Ball Valve REV 426A is 2pcs ball valve with motorized actuator valve material by stainless steel 304 316 with investment casing size 1 to 4 pressure rating 1 6Mpa suitable for water oil and gas application thread connection by NPT BSPT electric actuator installed model EA23 powered 220VAC 24VDC 50HZ plastic...

    Contact Now

  • Electric Ball Valve Stainless Steel 304 316 NPT

    Electric Ball Valve Stainless Steel 304 316 NPT

    • Packaging: Carton

    • Min. Order: 10 Set/Sets

    • Model No.: REV-426A

    • Transportation: Ocean,Air

    REV 426A Model electric ball valve is small size motorized ball valve SS304 or SS316 by 1000 WOG it is open close type with power 220VAC and 24VDC thread end REV 426A electric ball valve size from 1 to 4 it is used for Dairy Beverage Food Beer Pharmacy Biotechnology Cosmetic industries etc REV 426A electric ball valve...

    Contact Now

  • PPH Coupler Socket Fusion DIN 8078

    PPH Coupler Socket Fusion DIN 8078

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 100000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH coupler is socket fusion pipe fitting size from 20mm to 110mm PPH coupling fitting pressure rate is PN1 0 Mpa according to DIN standard working temperature from 0 degree to 95 degree widely used for chemical industrial especically used in chlor alkali industry and acid pickling industry RMI PLAST offer PPH coupler...

    Contact Now

  • PPH Union Pipe Fitting DIN

    PPH Union Pipe Fitting DIN

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 250000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH Union size from 20mm to 110mm designed as per DIN 8078 standards socket fusion welding pressure rate PN10 sealing rubber EPDM PPH union is used for connecting both valve and PPH pipe fittings with convenient to installation and maintaiance PPH union suitable for chemical industrial with working temperature upto 95...

    Contact Now

  • PPH Pipe Fitting End Cap DIN 8077

    PPH Pipe Fitting End Cap DIN 8077

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 200000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH End Cap size from 20mm to 110mm designed as per DIN 8078 standards socket fusion welding pressure rate PN10 PPH end cap is installed at the end of pipeline to seal the pipe system PPH end cap suitable for chemical industrial with working temperature upto 95 degree RMI PLAST offer PPH end cap socket welding with...

    Contact Now

  • PPH Vanstone Flange DIN PN10

    PPH Vanstone Flange DIN PN10

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 50000pcs per month

    • Min. Order: 20 Piece/Pieces

    PPH van stone flange is flange ring with adaptor the flange ring is steel core with PPH coated PPH van stone flange size from 20mm to 110mm designed as per DIN 8078 standards socket fusion welding pressure rate PN10 PPH van stone flange suitable for chemical industrial with working temperature upto 95 degree RMI PLAST...

    Contact Now

  • STAINLESS STEEL ELECTRIC CONTROL BALL VALVE 220V 24V

    STAINLESS STEEL ELECTRIC CONTROL BALL VALVE 220V 24V

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    High Quality Stainless Steel Electric Ball Valve Investment casing 3pcs body by material SS304 SS316 thread end by NPT BSPT and other standards installed with high quality electric actuator model EA23 plastic shell with excellent property of corrosive resistance voltage 220VAC 24VDC for optional small appearance...

    Contact Now

  • PPH Pipe DIN 8077/8078 PN10

    PPH Pipe DIN 8077/8078 PN10

    • Brand: RMI PLAST

    • Packaging: Kraft Paper

    • Supply Ability: 40000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH pipe fitting is made by PPH resin PPH is beta modified from polypropylene it has better property than PP of corrosion resist it is suitable for industrial application of corrosive acid PPH has good mechanical properties good heat resistance good chemical properties non toxic good electrical insulation Ningbo RMI...

    Contact Now

  • PPH Tee Socket Fusion Welding PN10

    PPH Tee Socket Fusion Welding PN10

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 25000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH tee has two types of connection one is socket fusion another is butt welding PPH tee socket fusion type size from 20mm to 110m butt wedling type size from 140mm to 400mm PPH pipe and fitting pressure rate is PN1 0 Mpa according to DIN standard working temperature from 0 degree to 95 degree widely used for chemical...

    Contact Now

  • PPH Double Union Ball Valve PN10

    PPH Double Union Ball Valve PN10

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 8000 sets per month

    • Min. Order: 100 Set/Sets

    PPH Double Union Ball Valve PN10 is true union ball valve made by PPH body socket fusion end connection as per standard DIN pressure rate PN10 working temperature 0 degree to 95 degree suitable for different kinds of acids and alkali liquid PPH double union ball valve is easy to installation maintenance and replace it...

    Contact Now

Review

Bandar Almur

Mar 23, 2020 5

What a nice Upvc Valve Din ! I love it!
S B Raza

Mar 14, 2020 5

I love its quality, and the price is competitive.Still recommend Ningbo RMI Plastic Co., Ltd. company!
Mrs.adan Chavis

Mar 12, 2020 5

I love this product. Thanks, Upvc Valve Din manufacturer.
  • Related Information
Good quality comes to start with; service is for Upvc Valve Din , pvc valve , pvc valves , accurate and timely service for you". We welcome old and new customers to negotiate with us. We will serve you with all sincerity!
"abide by the contract"", conforms on the market requirement, joins within the market competition by its superior quality likewise as provides far more comprehensive and great company for shoppers to let them develop into huge winner. The pursue on the corporation, is definitely the clients' gratification for Upvc Valve Din , pvc valve , pvc valves , We set a strict quality control system. We've got return and exchange policy and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our solutions. Be sure to feel free to contact us for further information if you have any questions. We are glad to work for every client.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List