Communicate with Supplier? Supplier
Zheng Mr. Zheng
What can I do for you?
Contact Supplier

Ningbo RMI Plastic Co., Ltd.

Cross Pipe Fitting In Stainless Steel - manufacturer, factory, supplier from China

(Total 24 Products for Cross Pipe Fitting In Stainless Steel)

  • Industrial Cross Pipe Fitting in Stainless Steel

    Industrial Cross Pipe Fitting in Stainless Steel

    • Brand: RMI

    • Packaging: carton

    • Supply Ability: 1000/MOUNTH

    • Min. Order: 1000 Bag/Bags

    Crosses also known as four way fittings cross branch lines A cross has one inlet and three outlets or vice versa and often have solvent welded socket or female threaded ends Cross fittings may stress pipes as temperatures change because they are at the center of four connection points A tee is steadier than a cross it...

    Contact Now

  • Stainless Steel 304 316 Pulse Damper

    Stainless Steel 304 316 Pulse Damper

    • Brand: RMIPLAST

    • Packaging: carton

    • Supply Ability: 1000/MOUNTH

    • Min. Order: 10 Piece/Pieces

    Stainless Steel Pulsation Damper is a device for eliminating pipeline pulsation and an accessory for metering pump It can smooth the pipeline pulsation and water hammer caused by metering pump diaphragm pump etc The medium is isolated by a corrosion resistant diaphragm the pipeline pulsation is smoothed by changing of...

    Contact Now

  • PTFE lined diaphragm valve

    PTFE lined diaphragm valve

    • Brand: RMIPLAST

    • Packaging: Wooden case

    • Supply Ability: 1000 sets per month

    • Min. Order: 1 Piece/Pieces

    RFV211 diaphragm valve is a weir type diaphragm valve with fluorine plastic lined the body is made by WCB cast iron and liner made by PTFE and FEP this valve is suitable for corrossive medium with temperarure below 150 degree and pressure rate below PN1 6 Mpa Basic specification Size range DN15 DN300 1 2 inch 12 inch...

    Contact Now

  • Pneumatic Ball Valve For End Control Pipe Systems

    Pneumatic Ball Valve For End Control Pipe Systems

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Small Size Pneumatic Ball Valve used for End Control Pipe Systems different valve material plastic steel stainless steel PTFE lined for optional pneumatic actuator double acting and single acting solenoid valve and limit switch box with signal feedback 4 20mA to control by system easily small size pneumatic ball is...

    Contact Now

  • Pneumatic Ball Valve SS316 Single Acting

    Pneumatic Ball Valve SS316 Single Acting

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Pneumatic Ball Valve SS316 size range 1 4 inch 3 8 inch 1 2 inch 3 4 inch 1 inch 1 1 4 inch 1 1 2 inch 2 inch 2 1 2 inch 3 inch 4 inch pneumatic actuator single acting with solenoid valve 220V 24V IP65 limit switch box with indicator Pneumatic Ball Valve SS316 is used for water treatment equipment chemical industry...

    Contact Now

  • Double Acting Pneumatic Ball Valve 2" 2-1/2" 3"

    Double Acting Pneumatic Ball Valve 2" 2-1/2" 3"

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Pneumatic Ball Valve Double Acting Size 2 2 1 2 3 4 valve material 304 standard DIN ANSI ISO BS thread connection and welding for optional Pneumatic actuator with Aluminium alloy shell and high quality inner parts air supply 0 5 0 8Mpa to control valve open and close 304 pneumatic Ball Valve is used for water pipeline...

    Contact Now

  • Double Acting Pneumatic Ball Valve 1/2" 3/4" 1"

    Double Acting Pneumatic Ball Valve 1/2" 3/4" 1"

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Double Acting Pneumatic Ball Valve Stainless Steel 304 offering size 1 4 3 8 1 2 3 4 1 1 1 4 1 1 2 2 2 1 2 3 4 it is suitable for water treatment weak acid pipe system hot water pipeline steam pipe system chemical project etc Pneumatic Ball Valve double acting use air supply 0 5 0 8Mpa to control valve open and close...

    Contact Now

  • Pneumatic 304 Ball Valve Double Acting Spring Return

    Pneumatic 304 Ball Valve Double Acting Spring Return

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Pneumatic Stainless Steel Ball Valve 3pcs type thread end welding end size range 1 4 to 4 body material have 201 304 316 316L actuator by pneumatic double acting and single acting solenoid valve limit switch box positioner and other accessories for optional this model pneumatic ball valve is suitable for water steam...

    Contact Now

  • Steel Pneumatic Ball Valve Double Acting Spring Return

    Steel Pneumatic Ball Valve Double Acting Spring Return

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    High quality Stainless Steel Pneumatic Ball Valve 2pcs SS304 316 body investment casing pressure rating 1 6 Mpa working temperature 20 to 180 size range DN6 to DN100 connection NPT BSPT actuator double acting and single acting available high quality treatment and inner parts Pneumatic Stainless Steel Ball Valve 2 pcs...

    Contact Now

  • Electric Ball Valve Stainless Steel 1-1/4" 1-1/2" 2"

    Electric Ball Valve Stainless Steel 1-1/4" 1-1/2" 2"

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    1 1 4 1 1 2 2 Electric Ball Valve produced by high quality Stainless Steel Ball Valve 304 304L 316 316L with excellent electric actuator EA23 used for water treatment systems chemical equipments small size body require small install room simple structure is easy to maintence and operate electric actuator use plastic...

    Contact Now

  • Electric Ball Valve Stainless Steel 304 316 NPT

    Electric Ball Valve Stainless Steel 304 316 NPT

    • Packaging: Carton

    • Min. Order: 10 Set/Sets

    • Model No.: REV-426A

    • Transportation: Ocean,Air

    REV 426A Model electric ball valve is small size motorized ball valve SS304 or SS316 by 1000 WOG it is open close type with power 220VAC and 24VDC thread end REV 426A electric ball valve size from 1 to 4 it is used for Dairy Beverage Food Beer Pharmacy Biotechnology Cosmetic industries etc REV 426A electric ball valve...

    Contact Now

  • PPH Cross PN10 Socket Fusion

    PPH Cross PN10 Socket Fusion

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 200000pcs per month

    • Min. Order: 150 Piece/Pieces

    PPH cross pipe fitting is four way socket fusion welding connection made by PPH resin according to DIN 8078 standard pressure rate PN10 PPH pipe fitting is in good corrosive resist property suitable for chemical industrial waste water treatment PPH cross size from 32mm to 110mm RMI PLAST offer PPH cross with following...

    Contact Now

  • PPH Coupler Socket Fusion DIN 8078

    PPH Coupler Socket Fusion DIN 8078

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 100000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH coupler is socket fusion pipe fitting size from 20mm to 110mm PPH coupling fitting pressure rate is PN1 0 Mpa according to DIN standard working temperature from 0 degree to 95 degree widely used for chemical industrial especically used in chlor alkali industry and acid pickling industry RMI PLAST offer PPH coupler...

    Contact Now

  • PPH Union Pipe Fitting DIN

    PPH Union Pipe Fitting DIN

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 250000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH Union size from 20mm to 110mm designed as per DIN 8078 standards socket fusion welding pressure rate PN10 sealing rubber EPDM PPH union is used for connecting both valve and PPH pipe fittings with convenient to installation and maintaiance PPH union suitable for chemical industrial with working temperature upto 95...

    Contact Now

  • PPH Pipe Fitting End Cap DIN 8077

    PPH Pipe Fitting End Cap DIN 8077

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 200000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH End Cap size from 20mm to 110mm designed as per DIN 8078 standards socket fusion welding pressure rate PN10 PPH end cap is installed at the end of pipeline to seal the pipe system PPH end cap suitable for chemical industrial with working temperature upto 95 degree RMI PLAST offer PPH end cap socket welding with...

    Contact Now

  • PPH Vanstone Flange DIN PN10

    PPH Vanstone Flange DIN PN10

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 50000pcs per month

    • Min. Order: 20 Piece/Pieces

    PPH van stone flange is flange ring with adaptor the flange ring is steel core with PPH coated PPH van stone flange size from 20mm to 110mm designed as per DIN 8078 standards socket fusion welding pressure rate PN10 PPH van stone flange suitable for chemical industrial with working temperature upto 95 degree RMI PLAST...

    Contact Now

  • STAINLESS STEEL ELECTRIC CONTROL BALL VALVE 220V 24V

    STAINLESS STEEL ELECTRIC CONTROL BALL VALVE 220V 24V

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    High Quality Stainless Steel Electric Ball Valve Investment casing 3pcs body by material SS304 SS316 thread end by NPT BSPT and other standards installed with high quality electric actuator model EA23 plastic shell with excellent property of corrosive resistance voltage 220VAC 24VDC for optional small appearance...

    Contact Now

  • PPH Pipe DIN 8077/8078 PN10

    PPH Pipe DIN 8077/8078 PN10

    • Brand: RMI PLAST

    • Packaging: Kraft Paper

    • Supply Ability: 40000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH pipe fitting is made by PPH resin PPH is beta modified from polypropylene it has better property than PP of corrosion resist it is suitable for industrial application of corrosive acid PPH has good mechanical properties good heat resistance good chemical properties non toxic good electrical insulation Ningbo RMI...

    Contact Now

  • PPH Tee Socket Fusion Welding PN10

    PPH Tee Socket Fusion Welding PN10

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 25000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH tee has two types of connection one is socket fusion another is butt welding PPH tee socket fusion type size from 20mm to 110m butt wedling type size from 140mm to 400mm PPH pipe and fitting pressure rate is PN1 0 Mpa according to DIN standard working temperature from 0 degree to 95 degree widely used for chemical...

    Contact Now

  • Stainless Steel Pneumatic Ball Valve Thread End

    Stainless Steel Pneumatic Ball Valve Thread End

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Pneumatic Ball Valve Stainless Steel 304 316 thread connection NPT BSPT double acting and single acting size from 1 4 to 4 working temperature 20 to 180 solenoid valve limit switch box and positioner for optional suitable for medium of water steam oil gas chemical Pneumatic Stainless Steel Ball Valve 2 pcs Thread End...

    Contact Now

  • Ball Valve Pneumatic Double Acting Single Acting

    Ball Valve Pneumatic Double Acting Single Acting

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 1000 sets per month

    • Min. Order: 10 Set/Sets

    Three Way Ball Valve with Pneumatic actuator powered by air size from 1 4 inch to 3 inch Three Way Ball Valve have T port and L port for different purpose pneumatic three way ball valve have double acting and single acting for optional it is used for water treatment equipment and branch pipe system controls Three Way...

    Contact Now

  • PPH Blind Flange DIN PN10

    PPH Blind Flange DIN PN10

    • Brand: RMI PLAST

    • Packaging: Carton

    • Supply Ability: 20000pcs per month

    • Min. Order: 100 Piece/Pieces

    PPH blind flange is also named blank flange it is installed at the end of pipe valve and equipment to stop the medium meanwhile it remain the operation room for inspection maintance of pipe system PPH blind flange can be made as per different standard of ANSI CL150 JIS 10K DIN PN10 RMI PLAST offer PPH Blind flange...

    Contact Now

  • Stainless Steel Ball Valve with Locked Handle

    Stainless Steel Ball Valve with Locked Handle

    • Brand: RMI

    • Packaging: Wooden box

    • Supply Ability: GOOD

    • Min. Order: 100 Bag/Bags

    Product Feature 1 Floating ball full bore or reduce bore 2 ISO5211 mounting pad for easy automation 3 Blow out proof stem design 4 PTFE RPTFE seat seal Seat seal material could be decided by customer s request or according to valve s medium temp Condition 5 Fire proof and anti static design if need 6 Operation Hand...

    Contact Now

  • Casting 3PC Stainless Steel Flanged Ball Valve

    Casting 3PC Stainless Steel Flanged Ball Valve

    • Brand: RMI

    • Packaging: Wooden box

    • Supply Ability: 1000/MOUNTH

    • Min. Order: 100 Bag/Bags

    Product Description WB 85 DIN 3202 F1 3PC Stainless Steel Flanged Ball Valve Features Face to face dimension DIN3202 F1 Flanged connection PN16 PN40 DIN2633 TEMPERATURE RANGE 20 C 150 C SUITABLE MEDIUM WATER OIL AIR AND SOME CORROSIVE LIQUID INVESTMENT CASTING BODY DESIGH 1 2 2 PN40 TEST API 598 MATERIAL CARBON STEEL...

    Contact Now

Review

Kenneth Su

Feb 23, 2020 4

I have to say, this is a amazing Cross Pipe Fitting In Stainless Steel .
Mr.nabil Yakoubi

Feb 23, 2020 4

Excellent Cross Pipe Fitting In Stainless Steel , Ningbo RMI Plastic Co., Ltd. is very responsive and helpful, I would deal with again anytime!
Tony Whitney

Feb 10, 2020 5

I am very happy with the purchase of this Cross Pipe Fitting In Stainless Steel from Ningbo RMI Plastic Co., Ltd. . It was packed neatly and arrived safely without any hassle.
  • Video
  • Industrial Cross Pipe Fitting in Stainless Steel
Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for Cross Pipe Fitting In Stainless Steel , Cross Pipe Fitting in Stainless Steel , Cross Pipe Fitting , and cherish every customer. We have maintained a strong reputation in the industry for many years. We are honest and work on building a long-term relationship with our customers.
"Fast and great quotations, informed advisers to help you choose the correct product that suits all your preferences, a short creation time, responsible top quality control and different services for paying and shipping affairs for Cross Pipe Fitting In Stainless Steel , Cross Pipe Fitting in Stainless Steel , Cross Pipe Fitting , With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation" we will earnestly provide qualified products and solutions and good service for domestic and international customers.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List